APA Open Community

Do any of you have 3D printers in your shop? And, if yes, when do you use them?

Hi Judi,

We have a 3D printer. We use it for customers that want a unique figure in low runs. The figure we use it for the most are rockets. The high schools in our area have rocket clubs and we do awards for the competitions. We also use it for custom plaque reliefs. There is a lot that can be done with one. I have attached a few pics of somethings we have done. (The tooth was my favorite!)

Do any of you have 3D printers in your shop? And, if yes, when do you use them?

Hi Angela,

Just curious, how do you "design" the pieces? Can you scan something or do you have a program for 3D design?

Thanks.

Hi Judi,

We have a 3D printer. We use it for customers that want a unique figure in low runs. The figure we use it for the most are rockets. The high schools in our area have rocket clubs and we do awards for the competitions. We also use it for custom plaque reliefs. There is a lot that can be done with one. I have attached a few pics of somethings we have done. (The tooth was my favorite!)

Do any of you have 3D printers in your shop? And, if yes, when do you use them?

Hi Judi,

We have a 3D printer. We use it for customers that want a unique figure in low runs. The figure we use it for the most are rockets. The high schools in our area have rocket clubs and we do awards for the competitions. We also use it for custom plaque reliefs. There is a lot that can be done with one. I have attached a few pics of somethings we have done. (The tooth was my favorite!)

Do any of you have 3D printers in your shop? And, if yes, when do you use them?

Hi Judi,

We have a 3D printer. We use it for customers that want a unique figure in low runs. The figure we use it for the most are rockets. The high schools in our area have rocket clubs and we do awards for the competitions. We also use it for custom plaque reliefs. There is a lot that can be done with one. I have attached a few pics of somethings we have done. (The tooth was my favorite!)

Do any of you have 3D printers in your shop? And, if yes, when do you use them?

What and how did you get that beautiful gold finish?

Hi Judi,

We have a 3D printer. We use it for customers that want a unique figure in low runs. The figure we use it for the most are rockets. The high schools in our area have rocket clubs and we do awards for the competitions. We also use it for custom plaque reliefs. There is a lot that can be done with one. I have attached a few pics of somethings we have done. (The tooth was my favorite!)

Do any of you have 3D printers in your shop? And, if yes, when do you use them?

Hi Judi,

We have a 3D printer. We use it for customers that want a unique figure in low runs. The figure we use it for the most are rockets. The high schools in our area have rocket clubs and we do awards for the competitions. We also use it for custom plaque reliefs. There is a lot that can be done with one. I have attached a few pics of somethings we have done. (The tooth was my favorite!)

Do any of you have 3D printers in your shop? And, if yes, when do you use them?

Angela,  Your rocket, bulldog and tooth figures look like they have a brushed metallic finish.  Is the lighting in the photos playing with my eyes or is this the result you are getting with the silk filament?

Hi Judi,

We have a 3D printer. We use it for customers that want a unique figure in low runs. The figure we use it for the most are rockets. The high schools in our area have rocket clubs and we do awards for the competitions. We also use it for custom plaque reliefs. There is a lot that can be done with one. I have attached a few pics of somethings we have done. (The tooth was my favorite!)

Do any of you have 3D printers in your shop? And, if yes, when do you use them?

Hi Judi,

We have a 3D printer. We use it for customers that want a unique figure in low runs. The figure we use it for the most are rockets. The high schools in our area have rocket clubs and we do awards for the competitions. We also use it for custom plaque reliefs. There is a lot that can be done with one. I have attached a few pics of somethings we have done. (The tooth was my favorite!)

Do any of you have 3D printers in your shop? And, if yes, when do you use them?

Hi Judi,

We have a 3D printer. We use it for customers that want a unique figure in low runs. The figure we use it for the most are rockets. The high schools in our area have rocket clubs and we do awards for the competitions. We also use it for custom plaque reliefs. There is a lot that can be done with one. I have attached a few pics of somethings we have done. (The tooth was my favorite!)

Do any of you have 3D printers in your shop? And, if yes, when do you use them?

Hi Angela,

On The bulldog figure, which looks fantastic, if you don't mind, I have two questions.

How long did it take to print each one"?

What was the cost of materials used for one?

Hi Judi,

We have a 3D printer. We use it for customers that want a unique figure in low runs. The figure we use it for the most are rockets. The high schools in our area have rocket clubs and we do awards for the competitions. We also use it for custom plaque reliefs. There is a lot that can be done with one. I have attached a few pics of somethings we have done. (The tooth was my favorite!)

Do any of you have 3D printers in your shop? And, if yes, when do you use them?

Hi Judi,

We have a 3D printer. We use it for customers that want a unique figure in low runs. The figure we use it for the most are rockets. The high schools in our area have rocket clubs and we do awards for the competitions. We also use it for custom plaque reliefs. There is a lot that can be done with one. I have attached a few pics of somethings we have done. (The tooth was my favorite!)

Do any of you have 3D printers in your shop? And, if yes, when do you use them?

Angela - Can you recommend good filament suppliers? The person we purchased our 3D printer from tended to purchase everything through Amazon and we'd prefer not to go that route if possible.

Thanks again. Will you be in Vegas?

------------------------------
Judi Brown, Owner
Tacoma Trophy
4021 100th St SW #B, Lakewood WA 98499
253.302.5566
judi@tacomatrophy.com

Original Message:
Sent: 01-05-2024 08:30
From: Angela Locklair
Subject: 3D Printer

Hi Judi,

We have a 3D printer. We use it for customers that want a unique figure in low runs. The figure we use it for the most are rockets. The high schools in our area have rocket clubs and we do awards for the competitions. We also use it for custom plaque reliefs. There is a lot that can be done with one. I have attached a few pics of somethings we have done. (The tooth was my favorite!)

------------------------------
Angela Locklair CRS
ABC Trophies
Summerville SC
843.297.6905

Original Message:
Sent: 12-28-2023 10:10
From: Judi Brown
Subject: 3D Printer

Do any of you have 3D printers in your shop? And, if yes, when do you use them?

------------------------------
Judi Brown, Owner
Tacoma Trophy
4021 100th St SW #B, Lakewood WA 98499
253.302.5566
judi@tacomatrophy.com
------------------------------

Hi Judi,

We have a 3D printer. We use it for customers that want a unique figure in low runs. The figure we use it for the most are rockets. The high schools in our area have rocket clubs and we do awards for the competitions. We also use it for custom plaque reliefs. There is a lot that can be done with one. I have attached a few pics of somethings we have done. (The tooth was my favorite!)

Do any of you have 3D printers in your shop? And, if yes, when do you use them?

Hi Angela

can you recomend us a 3D printer brand and a distributor for the  supplies

nice job on the tooth 🦷 

thanks

Hi Judi,

We have a 3D printer. We use it for customers that want a unique figure in low runs. The figure we use it for the most are rockets. The high schools in our area have rocket clubs and we do awards for the competitions. We also use it for custom plaque reliefs. There is a lot that can be done with one. I have attached a few pics of somethings we have done. (The tooth was my favorite!)

Do any of you have 3D printers in your shop? And, if yes, when do you use them?

Marcelo,  this video may help.

Hi Angela

can you recomend us a 3D printer brand and a distributor for the  supplies

nice job on the tooth 🦷 

thanks

Hi Judi,

We have a 3D printer. We use it for customers that want a unique figure in low runs. The figure we use it for the most are rockets. The high schools in our area have rocket clubs and we do awards for the competitions. We also use it for custom plaque reliefs. There is a lot that can be done with one. I have attached a few pics of somethings we have done. (The tooth was my favorite!)

Do any of you have 3D printers in your shop? And, if yes, when do you use them?

Do any of you have 3D printers in your shop? And, if yes, when do you use them?